The influence of preformed plasma on a laser-driven shock produced in a planar target at the conditions relevant to shock ignition.

Anno: 2013

Autori: Badziak J., Chodukowski T., Kalinowska Z., Parys P., Pisarczyk T., Rączka P., Rosiński M., Ryc L., Wolowski J., Zaras A., Gizzi L.A., Baffigi F., Cristoforetti G., Koester P., Labate L., Antonelli L., Richetta M., Batani D., Folpini G., Malka G., Maheut Y., Krouský E., Pfeifer M., Renner O., Šmíd M., Skála J., Ullschmied J., Kucharik M., Liska R., Rhee Y.-J., Consoli F., De Angelis R., Spindloe C.

Affiliazione autori: Institute of Plasma Physics and Laser Microfusion,
Warsaw, Poland;
Intense Laser Irradiation Laboratory, INO-CNR, Pisa, Italy;
University of Roma “Tor Vergata”, Roma, Italy;
Centre Lasers Intenses et Applications, Universite Bordeaux 1, Talence, France;
Institute of Physics, Prague, Czech Republic;
Institute of Plasma Physics, Prague, Czech Republic;
Czech Technical University, FNSPE, Prague, Czech Republic;
Nuclear Data Center, KAERI, Korea;
ENEA, Centro Ricerche Frascati, Frascati, Italy,
Scitech Precision, Rutherford Appleton Laboratory,
Didcot, UK

Abstract: The effect of preformed plasma on a laser-driven shock produced in a planar target at the conditions relevant to the shock ignition scenario of ICF was investigated at the kilojoule PALS laser facility. Characteristics of the preformed plasma were controlled by the delay ∆t between the auxiliary beam (1ω, 7×1013 W/cm2) and the main 3ω, 250 ps laser pulse of intensity up to 1016 W/cm2, and measured with the use of 3-frame interferometry, ion diagnostics, an X-ray spectrometer and Ka imaging. Parameters of the shock produced in a CH(Cl) target (25 µm or 40 µm thick) by the intense 3ω laser pulse with energy ranging between 50 J and 200 J were determined by measuring the craters produced by the shock in a massive Cu target behind the layer of plastic. The volume and the shape of these craters was found to depend rather weakly on the preplasma thickness, which implies the same is true for the total energy of shocks and pressure generated by them. From the comparison of the measured crater parameters with those obtained in 2D simulations using the PALE code, it was estimated that for I3ω ≈ 1016 W/cm2 the pressure at the rear (non-irradiated) side of the 25-µm plastic layer reaches about 100 Mbar.

Titolo Convegno: 40th European Physical Society Conference on Plasma Physics. – Finland, 1st – 5th July 2013
Luogo: Espoo, Finland

Maggiori informazioni: Contributed Papers. Mulhouse: European Physical
Society, 2013. ISBN 2-914771-84-3. – (Europhysics Conference Abstracts (ECA), P2.203)).
Parole chiavi: Laser-driven; ICF; Shock ignition